HDMI CVBS composite Video input encoder board PCBA,  IP ethernet LAN output for a living stream,  H.265 H.264 encoding, support  HTTP RSTP UDP ONVIF TCP IP

This encoder board supports HDMI, SDI, CVBS video input, and IP ethernet RJ45 living stream output; the most common application is for our wireless video transmitters, which can encode the HDMI or CVBS video signal to a digital living stream using H.264 or H.265 compression technology, and send it to the decoder receiver. Please contact us if you need a similar function customized for your project.

Features

Our HDMI CVBS Composite Video encoder Advantage

• H.265/H.264 audio and video encoding with ultra-low latency 1080P@60 real-time video capture and encoding

• After encoding, the Ethernet port output or output to the wireless module and the video encoding bit rate can be dynamically configured.

• Audio input and output are supported.

• Support for simultaneous input encoding of two videos (HDMI+AV) (optional, the default is HDMI or AV encoding, choose one of two input sourcing options).

• For configuration management, use a web interface or a serial port.

Audio and video input

✔ HDMI interface(audio+video):1080 60P,1080 50P,1080 30P,1080 25P,1080 60I,1080 50I, 720 60P,720 50P,720 30P, …, various modes adaptive;

✔ AV in interface(audio+video):720×480 60I(NTSC),720×576 50I(PAL), mode adaptive.through the AV interface, it can be Line inor Mic in.

video input sources. The default audio input is the same as the video input interface. The audio input interface can also be configured through the Web UI the serial port detects audio. or The audio and video source signals are encoded, and the audio and video source acquisition interface can also be configured through the configuration serial port, and the audio and video source acquisition interface can be dynamically switched through serial port commands during system operation.

Video encoding: H.265 or H.264 format, the encoding bit rate can be configured.

Audio encoding:AAC encoding.

By programming special firmware HDMI+AV the simultaneous capture and encoding of board Audio output(Audio out)

The board has a built-in audio decoding output function(Line out), which can be connected to an external headphone or audio power amplifier. Audio is decoded and played.

Ethernet port (Ethernet interface)

supports our two-way wireless transmission module, or other third-party two-way links.

Wireless transmission interface(FPC_Main interface)

can be connected to our COFDM wireless transmission module, and can also be connected to our two-way wireless transmission link module.

Data-uart

TTL 3.3V level, parameters such as transmission baud rate can be configured. When the board is through a wireless link, the data serial port is used for transparent data transmission.

Control-uart

TTL 3.3V level, which can be connected to our parameter configuration panel or another upper computer to configure the encoding board system.

USB Host interface

software upgrade and maintenance.

Power supply voltage

supports the reverse connection protection of the power input, and supports the power input range of 7~30V. Provides a 5V power output interface. The maximum working power consumption is 2.4W (1080P60 H.265 encoding), and the maximum current is 200mA.

Indicator

power indicator, video encoding work indicator.

The board size is 70x45mm

Board thickness 1.2mm

The height of the back component is less than 2.5mm, and the height of the front component is less than 6.8mm.

Board weight

20.6 grams.

Connector Interface Signal

1) Power supply and indicator light

The power input interface of 2PIN 2.0mm pitch female socket. The board also provides a 5V power output interface (5V-out with GND Two welding holes), it is convenient for users to connect the cooling fan to the power supply when necessary. The following figure is the power pin signal and indicator description.

Power-LED: Power working indicator, red, always on after normal power-on;

Encoding-LED: Video encoding working indicator, green, the system will flash during video encoding. If this light does not flash, it means that SUE6 is not performing video encoding(for example, the front-end video capture fails).

2)AV input port, parameter serial port, data serial port, audio output port, USB port, network port signal

AV-in: analog audio and video input interface,4PIN 1.25mm pitch socket, audio supports Mic in or Line in input.

• AL (Audio in light), audio input left channel;

• AR(Audio in right), audio input right channel;

• GND, signal ground;

AV, analog video input.

Control-uart: Equipped with serial port,4PIN 1.25mm pitch socket, TTL 3.3V level, used for the board parameter configuration, can be connected to Sihaida parameter configuration panel or another host computer.

Data-uart: data serial port,3PIN 1.25mm pitch socket, TTL 3.3V level, transmission baud rate, and other parameters can be configured. When the board is connected to the iVcan wireless transmission module, the data serial port is used for transparent data transmission.

USB interface:4PIN 1.25mm pitch socket, used for SUE6 board software upgrade and maintenance.

Audio-out interface:2PIN 1.25mm pitch socket, the board has a built-in audio decoding output function(Line out), which can be connected to an external headphone or audio power amplifier. Decode and play the audio input from the network port.

Ethernet: Ethernet interface,4PIN 1.25mm pitch socket